A new series of flexible shafts designed for remote control assemblies has been introduced by Stock Drive Products (An ISO 9001 Registered Manufacturer). Identified as the A 7C13M (Metric) and A 7C13- (Inch) Series, they are designed to be panel mounted without casing.

These units range from 3.3 mm to 4.8 mm (.130" to .187") in diameter and from 76 mm to 355 mm (3" to 14") in length. They are designed to operate in a manual mode and have a curvature radius ranging from 500 mm to 38 mm (20" to 1.5").

Complete technical specifications are shown in Catalogs D805 (Metric) and D790 (Inch), available free upon request from Stock Drive Products.

SDP3 42